EXPE Technologies https://expe.in No.1 Robotics & workshop kit manufacturer Sun, 18 Jun 2017 11:13:40 +0000 en-US hourly 1 https://wordpress.org/?v=6.8.3 How to make line following robot without micro-controller https://expe.in/2017/06/18/how-to-make-line-following-robot-without-micro-controller/ https://expe.in/2017/06/18/how-to-make-line-following-robot-without-micro-controller/#respond Sun, 18 Jun 2017 11:12:56 +0000 http://expe.in/?p=1177 https://expe.in/2017/06/18/how-to-make-line-following-robot-without-micro-controller/feed/ 0 Learn how to control your robotic arm manually https://expe.in/2017/05/30/learn-how-to-control-your-robotic-arm-manually/ https://expe.in/2017/05/30/learn-how-to-control-your-robotic-arm-manually/#respond Tue, 30 May 2017 09:47:34 +0000 http://expe.in/?p=841

LEARN – HOW TO CONTROL YOUR ROBOTIC ARM

Step 1: What do you need

You will require the following items
  1. My Arm kit (Acrylic Assembly with 4 DC geared BO motors)
  2. 4 Motor-direction-control switch (3 Way, 6 terminal switch)
  3. 9v Battery
  4. 9v Battery connector
  5. 8-core rainbow wire strip (2 mtr.)
MY Arm kit contains all above required items.

Step 2: Connect wire with 4 motors

Connect/solder the 8-core rainbow wire with 4 motors of MY Arm. Each motor have 2 terminals, hence 4 motors have 8 terminals so connect them with 8 wires of rainbow wire strip.
Please note that gripper motor will be little far away from other motors, so the wire you connect with this motor should be longer.

Step 3: Build the ‘My Arm’

Follow the simple instructions described in the assembly manual (provided with every MY Arm kit) to build your ‘MY Arm’.
MY Arm assembly.jpg

Step 4: Connections

Connect MY Arm motors, Slide switches and battery as shown in the connection diagram.
Connection diagramNote: You can also use big DPDT switches with same connection diagram and you can also use different battery/power supply according to your project/use. You can use 3 to 9v DC supply/battery. Lower voltage (i.e. 3v DC) will result in slow movement of arm. 6v DC is the best suitable voltage for medium speed and smoother control of MY Arm.

Step 5: Congratulations! You are done, Enjoy!

High five! You have done all steps successfully, now its time to test and control your MY Arm with the connected switches. You can fix these switches and battery in a box for better looking and comfort. Have fun with your robotic arm. Buy MY Arm kit from amazon here If you are facing any difficulty or have any suggestion or feedback, please write us at expetechnologies@gmail.com Comment & share if you liked the tutorial.
]]> https://expe.in/2017/05/30/learn-how-to-control-your-robotic-arm-manually/feed/ 0 MY Arm1 https://expe.in/2017/05/29/my-arm1/ https://expe.in/2017/05/29/my-arm1/#respond Mon, 29 May 2017 05:35:47 +0000 http://expe.in/?p=696 https://expe.in/2017/05/29/my-arm1/feed/ 0 Hello world! https://expe.in/2017/03/04/hello-world/ https://expe.in/2017/03/04/hello-world/#respond Sat, 04 Mar 2017 11:21:39 +0000 http://expe.in/?p=1 https://expe.in/2017/03/04/hello-world/feed/ 0